Speck-electronics SSM User Manual download pdf (Page 10)

The effects section provides total control for up to 8 stereo effects

devices.

Each of the effects channels include an effects send master and

associated solo. The effects return includes a stereo effects return level,

pan, in-place solo, and mute. Each effects channel has a 1/4" send jack

and two 1/4" jacks for the left and right effects returns.

The master section provides the SSM with many choices for routing

and controlling the synth signals from the input section and effects

devices from the effects section.

The master section includes a stereo program, stereo monitor, and stereo

headphone controls. The stereo cue, stereo aux, and mono click return

sections allow a variety of signals to be mixed with the synth signals to

the monitor and headphone outputs. The master section provides a full

compliment of 1/4" and XL type input and output connectors that allow

the SSM to adapt to a wide range of professional situations.

The SSM mixing system is available in three models: the SSM-24, 12

stereo input channels; the SSMEX-16 Expander, 16 mono channels;

and the SSMEX-32 Expander, 16 stereo input channels.

The mixers can be rack mounted vertically or horizontally using the

optional slide/tilt accessory. This can save up to five rack spaces.

The "Zero flex" integrated chassis design is virtually impervious to rack

stresses.

Eight discrete effects sends per channel are complimented by eight

stereo effects returns.

Each stereo or mono input channel employs a unique channel "Kill"

switch that deletes the dry input signal from the stereo program but

leaves all other functions, such as the effect send and channels direct

outputs, active.

Presence of signal LED's show which inputs are active at a glance.

Impedance balanced patch points allow for long connections to a passive

stereo volume pedal for dynamic control of the entire mix.

A separate tuner output follows the solo for quick isolation.

Master section

Features

Effects section

Chapter 1 Introduction Section

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 60 61

No comments

Speck-electronics SSM User Manual Page 10